Altcomtechniques - Chuyên cập nhật mới nhất tin công nghệ 4.0
  • Home
  • Công Nghệ
  • Điện Thoại
  • Máy Tính
  • Phần Mềm
No Result
View All Result
  • Home
  • Công Nghệ
  • Điện Thoại
  • Máy Tính
  • Phần Mềm
No Result
View All Result
Altcomtechniques - Chuyên cập nhật mới nhất tin công nghệ 4.0
No Result
View All Result

HP LaserJet Pro P1102w Printer(CE658A), How to configure wireless settings

admin by admin
May 22, 2020
in Công Nghệ
41
HP LaserJet Pro P1102w Printer(CE658A), How to configure wireless settings



HP LaserJet Pro P1102w Printer (CE658A)
How to Enable Ad Hoc, modify settings, reset to factory default or assigning IP Fixe on HP LaserJet Pro P1102w Printer (CE658A) without access to Modem.
(HP1102W CE657A is a little bit different but should work)
1) Check your settings, to do that, press and hold Cancel button for printing one configuration page
2) We can see that there are there are some personal settings
3) We need to restore the printer to factory-set default settings
4) Press the Power button to turn off the product.
5) Press the Power button to turn on the product.
6) The product begins to initialize.
7) During init press and hold the Cancel button and the Wireless button for 10 seconds
…/… until 2 LED lights blink together, and then release both buttons.
LED lights blink alternatively until only green led is on.
The factory default settings are restored.
8) Press and hold cancel button for printing one new configuration page
9) You can see that your printer report shows IP Address to 0.0.0.0, same 0.0.0.0 for subnet, default gateway…
And the Direct Print is off.
10) Now go on one computer of your wireless domain (wired or wireless).
And launch full software from hp support
11) Follow this simple steps! (I cut a little bit the waiting time)
12) Now close all windows and come back to your Printer P1102W.
13) Press and hold cancel button for printing one new configuration page.
14) Note carrefully : IPv4, Subnet and Ip Default Gateway and come back on your computer
15) It should be 169.254.xxx.xxx, modify your network settings as following…
169.254.XXX.XXX+1, subnet and gateway as on your last printed page.
16) Open your browser and go to the http site of the IP printer address.
17) Once you are in the Printer Web-Interface,
Go to “Networking” and configure your wireless network and click
apply.
18) Configure back the TCP/IP Network Properties of your computer as origin.
19) Once it’s configured and working, you should be able to ping the printer with his new IP and configure it on all your posts.
20) That’s all folk!!!

Nguồn: https://altcommtechniques.com

Xem thêm bài viết khác: https://altcommtechniques.com/cong-nghe/

Xem thêm Bài Viết:

  • CRM của hàng hóa bất động sản – Giải pháp quản lý hiệu quả
  • Top 10 sàn giao dịch bất động sản Hà Nội lớn và uy tín nhất
  • Ổ cứng Seagate Barracuda kết hợp công nghệ Intel Optane
  • Hướng dẫn sử dụng máy in kim Epson LQ 310 theo cách đơn giản nhất
  • Mở hộp máy in hóa đơn EPSON TM T82II (cổng LAN)
Previous Post

HOW TO : 50 SIMPLE DANCE MOVES TO USE IN A DANCE BATTLE (ASPECTZAVI VS DC PT 2)

Next Post

Cách tải liên quân Mobile chơi trên máy tính PC và Laptop mới nhất

Next Post
Cách tải liên quân Mobile chơi trên máy tính PC và Laptop mới nhất

Cách tải liên quân Mobile chơi trên máy tính PC và Laptop mới nhất

Comments 41

  1. Cyeleven says:
    2 years ago

    Didn't do this but got mine to work by doing standard installation which ends without the printer connected to network, then upgraded firmware here:

    https://support.hp.com/us-en/drivers/selfservice/closure/hp-laserjet-pro-p1102-printer-series/4110394/model/4110306?ssfFlag=true&sku= followed by:

    When the update completes, click OK.

    If you connected a USB cable to update your network printer, continue with these steps remove the USB driver that Windows installed during the connection.

    Search Windows for ‘Devices and Printers’, then click Devices and Printers in the list of results.

    Right-click the USB printer device that matches your printer model, then select **Remove Device **.

    Disconnect the USB cable from the printer and the computer, then restart the computer.

    When I reboot I see a new printer installed under the name NPI**** (Laserjet Professional P 1102w) with **** being the last 6 of printer's MAC ID.

    Thanks HP for supporting your products. Peace out.

    Reply
  2. Jane Ridolfi says:
    2 years ago

    there is no sound

    Reply
  3. Evan C says:
    2 years ago

    Didn't work. Every time i tried to connect my HP LaserJet Pro M132a , software won't even run. Finally i had to contact HP on (800) 975-0148 for resolving my issue. The only reason I actually tried this was because of all the reviews . Thank you anyways!!!!

    Reply
  4. Moe Hussein says:
    2 years ago

    Fuck you HP

    Reply
  5. Alexander says:
    2 years ago

    There is no direct print configuration on the paper when every IP is 0.0.0.0

    Reply
  6. johnson rajesh says:
    2 years ago

    Can i get the software link for this to connect in wifi

    Reply
  7. 張在焮 says:
    2 years ago

    This is a great printer. I love the double-sided printing feature.σσ>share4.photo/HpLaserPrint?ш      I originally got one for work, but after using it for a while, decided to get one for home as well. The only downside is the cost of the cartridge, but if you get the X it is worth the extra as you get almost 2x as many prints.

    Reply
  8. Lonely Star says:
    2 years ago

    it's hard to understand

    Reply
  9. AstelliA says:
    2 years ago

    2:18 nothing appear my wifi connection at this step someone can help me ?

    Reply
  10. Reahuo says:
    2 years ago

    Hello from Cambodia, and thank u too much now my printer has worked now.

    Reply
  11. Adam Perko says:
    2 years ago

    Printer’s website wont load

    Reply
  12. Adam Perko says:
    2 years ago

    Program wont even run

    Reply
  13. Amir Zeb says:
    2 years ago

    how to print word or excel document wirelessly from a mobile.

    Reply
  14. Kirk Arnold says:
    2 years ago

    I had issues with connected to wifi and nothing worked. Not even this solution. How I fixed was simply press the Wifi button on the printer, when it stated blink I pressed the WPS button on my router and it connected within a minute. Don't need to install software for Windows 10 it simply works

    Reply
  15. Lonely Star says:
    2 years ago

    Hi. Im in the printer web interface step. In networking tab, where can you find the manual ip address?

    Reply
  16. Interstellar Connections says:
    2 years ago

    I was going crazy trying to get my wireless and wps to work spending hours and hours on it. Then I found this website and I did the factory reset. Now everything works and I can go on and live my life free of obsession. Thank you! You've been a great help!

    Reply
  17. iixchxrry says:
    2 years ago

    Hello it’s me Estelle

    Reply
  18. Lixa Pixa says:
    2 years ago

    I really wish this video would have helped me. It didn't. 🙁

    Reply
  19. didi112195 says:
    2 years ago

    HELP! I downloaded the full software and HP support program but after it does the whole "extracting" thing nothing happens. How do I get the program to open?

    Reply
  20. Yasser Pino Alvarez says:
    2 years ago

    after download the software, I doble click in the file and start extracting but never launch as you shows in the video

    Reply
  21. Denis Iliev says:
    2 years ago

    Thank you very much. If drivers doesnt open and launching type in C:LJP1100_P1560_P1600_Full_SolutionHpSetup.exe in the ,, Windows Run'', which opens by pressing Windows button and R. Had that problem, but the video was perfect

    Reply
  22. adham daoud says:
    2 years ago

    Hi

    Is this printer in Egypt?

    Thank you

    Reply
  23. Narendrakumar Singh says:
    2 years ago

    1102w hp blue and red light blinking this problem

    Reply
  24. TigerTigerPantherFox says:
    2 years ago

    I really feel like throwing the printer in the bin now! Why can't HP make it easier to connect like most other appliances!!! Why make it so hard to connect a printer?

    Reply
  25. Shera Gistand says:
    2 years ago

    How can I find my claim code

    Reply
  26. Anonymous Boss says:
    2 years ago

    I have a HP laser jet P1109w
    Will this work on that
    And where did u download the software u opened up in the vid

    Reply
  27. Justin Trombley says:
    2 years ago

    The software refuses to open. It extracts but then nothing

    Reply
  28. Amateur Tech says:
    2 years ago

    If you've changed your wireless password or name on your router you may have to do this…. The easiest way is to set it up via usb/printer cable, then when setting up the printer, go into printer utility and it opens the HP section where you can change the SSID and password for the printer to connect to.. . then delete the printer and add it again while not connected via usb, that was the easiest way for my mac after i changed the router and lost my printer…

    Reply
  29. Kirk Arnold says:
    2 years ago

    I had issues with this Printer because of the wifi setup. What finally worked for me was press the WPS button on your router to allow the printer to get on your wifi connection. any of your wireless devices (Laptop or tablets or phones) should automatically see the printer. Now if you have a desktop that is hardwired (No wireless, setup the software and select the option wireless network instead of wireless or USB. finally worked for me

    Reply
  30. Resume Byron says:
    2 years ago

    In the Printer Web-interface, under "Networking", under IP Address Configuration — once you select the "Manual IP" button, where are you getting the manual configuration from for the "manual IP address? I noticed the information didn't come from the configuration print-out generated by the printer.

    Reply
  31. Przyroda Pełnym Głosem! says:
    2 years ago

    where I can find Ip address?

    Reply
  32. sputnik94115 says:
    2 years ago

    To get this printer to work wirelessly with Windows 10, these are the steps I took recently that worked. 1.) I logged in to my router and created a static IP address. The software on the HP support page is wrong for the 1102w, what you want to do is go to the support page for the 1109w model, that software will work with W10 and will also have the W10 drivers for the 1102w printer. Download the executable file and run it, following the instructions given there. My 1102w installed flawlessly then. It did automatically choose the static IP address I created on the router, automatically during setup. Works great now! https://support.hp.com/us-en/drivers/selfservice/hp-laserjet-pro-p1109-printer-series/8501654/model/8501690

    Reply
  33. esron sibuea says:
    2 years ago

    how i got the IP address this print ?

    Reply
  34. Filip Sacher says:
    2 years ago

    I had to IP adress 0.0.0.0 config manual.
    I used util NtScrubber (https://uloz.to/!DyUETLYwkQks/ntscrubber-rar) or you can used new compurer was not connect to printer P1102w.
    After clear all driver files by NtScrubber i can start install wireleas printer corect.
    Now i have correct IP.
    By FiSach

    Reply
  35. Ivan Molina says:
    2 years ago

    The HP Laserjet p1102w have ethernet port? Why do you have change settings in there device communication?

    Reply
  36. PHOENIX says:
    2 years ago

    at 2:45 how u got the pass-phrase

    Reply
  37. Amaru Garcia says:
    2 years ago

    Muy bien

    Reply
  38. RAJESH DAS says:
    2 years ago

    this priter 300hundred print….

    Reply
  39. Romain Espera says:
    2 years ago

    YOU NEED TO UPDATE PRINTER IF SSID DONT APPEAR

    Reply
  40. Kelly Loomis says:
    2 years ago

    There is no sound!

    Reply
  41. Andrea Maccaferri says:
    2 years ago

    I have the same printer, unfortunally all ip number was 0.0.0.0, direct print was off, wireless disabled.
    I have reset to default as explained, tried to install using usb cable and HP install software, printer was detected by usb and installed usb mode, but no way to setup any wifi network in automatic or manual using ssid, after hour of useless try and try again, I have enabled wps on router, pressed wifi button on printer and magically the printer get an ip number and connected to router. Then after printed status page, I can get into configuration page of printer using the printer status ip number.

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Tin Hot

CRM của hàng hóa bất động sản – Giải pháp quản lý hiệu quả

July 20, 2022
Top 10 sàn giao dịch bất động sản Hà Nội lớn và uy tín nhất

Top 10 sàn giao dịch bất động sản Hà Nội lớn và uy tín nhất

March 7, 2022

Ổ cứng Seagate Barracuda kết hợp công nghệ Intel Optane

April 19, 2021
Máy in hóa đơn – Review và hướng dẫn sử dụng máy in kim Epson LQ310

Hướng dẫn sử dụng máy in kim Epson LQ 310 theo cách đơn giản nhất

September 1, 2020
Mở hộp máy in hóa đơn EPSON TM T82II (cổng LAN)

Mở hộp máy in hóa đơn EPSON TM T82II (cổng LAN)

May 30, 2020
Máy in ảnh mini Xiaomi Home Printer – Cơ Động – In Hình Ảnh Cực Đẹp – Giá Tốt Nhất Trên Thị Trường

Máy in ảnh mini Xiaomi Home Printer – Cơ Động – In Hình Ảnh Cực Đẹp – Giá Tốt Nhất Trên Thị Trường

May 30, 2020
  • Liên Hệ
  • Chính Sách Bảo Mật

© 2022 JNews - Premium WordPress news & magazine theme by Jegtheme.

No Result
View All Result
  • Home
  • Công Nghệ
  • Điện Thoại
  • Máy Tính
  • Phần Mềm

© 2022 JNews - Premium WordPress news & magazine theme by Jegtheme.